Decorative Waterproof Cement Paint
In stock
Reconfirm the price with seller
- Customer pickup,
- Courier
- In detail
Products of other enterprises
Technical characteristics
- BrandWaterProof
Description
SUNCEM GOLD is made with a base of best quality white portland cement and is supplied in powder form, requires only addition of water in equal volume. Unlike other Cement Paints, mixing is much easier. SUNCEM GOLD when applied as per directions, render beautiful matt finish.
SUNCEM GOLD can be applied by brush or spray to concrete, asbestos cement sheets, cement sand renderings, most wall and fibre boards and roughcast. It is NOT recommended for external application to common bricks unless these bricks are dry at the time of application and the design of structure affords maximum protection against moisture penetration. SUNCEM GOLD should NOT be used on Gypsum plaster, metal, lime, or over oil paint.
SUNCEM GOLD when applied according to instructions
Provides a hard, durable decorative surface which will not rub flake or peel off
Repels rain on external surface and prevents penetration of water and dampness on internal surface
Renders a beautiful matt finish
Can be washed repeatedly
Is hygienic and unaffected by climatic conditions
Is an excellent light and heat reflector in the lighter colors and increases the light reflection of walls and ceilings by over 20%
Is ideal finish for both exteriors and interiors
Application:
Wet properly the surface to be painted. SUNCEM GOLD should not be applied while water is draining from the surface. Allow a little times for the water to get absorbed into the surface. Apply SUNCEM GOLD with a good quality brush. The first coat should be well brushed on the surface. Subsequent coat should not be applied until the earlier coat has hardened. Minimums of two coats are necessary.
Curing:
Each SUNCEM GOLD application should be wetted properly at the end of the day with a water spray. Depending upon the climatic conditions wetting should be done four to six hours after the application of SUNCEM GOLD coat and the wetting is repeated to achieve better results. An interval of 24 hours (minimum) should be allowed before application of second coat. It is essential to wet the surface before applying the subsequent coat.
Covering Capacity:
55-75 sq. ft / Litre depending upon the nature and porosity of the surface.
Shades:
Available in over 30 shades.
Packing:
20 Ltr., 4 Ltr., 1 Ltr., Plastic pails.
SUNCEM GOLD can be applied by brush or spray to concrete, asbestos cement sheets, cement sand renderings, most wall and fibre boards and roughcast. It is NOT recommended for external application to common bricks unless these bricks are dry at the time of application and the design of structure affords maximum protection against moisture penetration. SUNCEM GOLD should NOT be used on Gypsum plaster, metal, lime, or over oil paint.
SUNCEM GOLD when applied according to instructions
Provides a hard, durable decorative surface which will not rub flake or peel off
Repels rain on external surface and prevents penetration of water and dampness on internal surface
Renders a beautiful matt finish
Can be washed repeatedly
Is hygienic and unaffected by climatic conditions
Is an excellent light and heat reflector in the lighter colors and increases the light reflection of walls and ceilings by over 20%
Is ideal finish for both exteriors and interiors
Application:
Wet properly the surface to be painted. SUNCEM GOLD should not be applied while water is draining from the surface. Allow a little times for the water to get absorbed into the surface. Apply SUNCEM GOLD with a good quality brush. The first coat should be well brushed on the surface. Subsequent coat should not be applied until the earlier coat has hardened. Minimums of two coats are necessary.
Curing:
Each SUNCEM GOLD application should be wetted properly at the end of the day with a water spray. Depending upon the climatic conditions wetting should be done four to six hours after the application of SUNCEM GOLD coat and the wetting is repeated to achieve better results. An interval of 24 hours (minimum) should be allowed before application of second coat. It is essential to wet the surface before applying the subsequent coat.
Covering Capacity:
55-75 sq. ft / Litre depending upon the nature and porosity of the surface.
Shades:
Available in over 30 shades.
Packing:
20 Ltr., 4 Ltr., 1 Ltr., Plastic pails.
Contact the seller
Decorative Waterproof Cement Paint
We recommend to see